Hylele FL07 LED Highbay Lamp
As one of the most authoritative electrical product safety certifications in Europe, ENEC certification has higher requirements for product quality and safety. Hylele FL07 series LED highbay lights fully demonstrate Hylele's competitiveness in the field of outdoor lighting. We will also continue to work hard to provide our customers with more efficient, safe and high-quality lighting solutions.
What’s ENEC? similar but differs from CE
ENEC certification is the abbreviation of European Norms Electrical Certification. It is a certification program proposed by CELELEC (Electrotechnical Standardization Organization of the European Executive Committee). It mainly targets electrical products that comply with European standards, such as LED lamps, LED drivers, household appliances, adapters, sockets, and cables. The standards involved are EN60598, EN61347, and EN60950, etc. The ENEC mark is a universal mark for European safety certification. This mark is adopted by manufacturers based on the harmonization of European safety standards for testing. However, it is not a mandatory certification but a voluntary one. Manufacturers can voluntarily choose whether to apply for the ENEC certification mark. However, in the European market, consumers tend to trust products with the ENEC certification mark more because the ENEC mark means that the safety and quality of the product are relatively more guaranteed.
The CE mark is also a safety certification mark, which is regarded as a “passport” for manufacturers to open and enter the European market. Only products with the CE mark can be sold in the EU member states, thus realizing the free circulation of goods within the EU member states. The CE mark indicates that the product complies with the basic requirements of the EU’s ” New Approach to Technical Harmonisation and Standardisation” directive. The EU has issued a total of 32 directives. The commonly used model internationally is to apply for third-party assessment, and a CE certificate is issued by a recognized certification agency. Similarly, many small testing organizations can issue CE certificates, and they can also declare themselves.
In terms of application, ENEC certification focuses more on the safety and performance of electrical products, while the CE mark covers a wider range of product categories and directives. ENEC has relatively high requirements for products, and the technical information it provides will also be involved. In addition, the requirements for factory audits will also be relatively high, and factories must be inspected regularly, while CE has relatively low or no requirements for these requirements. Generally speaking, CE is easier for manufacturer to get for their products, while ENEC is more difficult to get.
Hylele develops FL07 LED highbay light
Hylele (street light manufacturer and supplier) is a professional manufacturer of outdoor floodlight products with many years of experience in producing high power lamps.The FL07 high mast lamps have a wattage range of 400-3200W, which can meet the lighting needs of all kinds of large and small sports stadiums, including soccer fields, multi-purpose stadiums, tennis courts, baseball diamonds, cricket pitches, rugby pitches and so on. In addition to stadiums, these high power floodlights can also be used to illuminate large areas such as outdoor plazas, airports, marinas, large parking lots etc. The FL07 has a maximum luminous efficacy of 185LM/W and is available in 4 different light distribution methods (including symmetric and asymmetric), which are suitable for different stadium sizes, pole heights, and pole distribution. In addition, we also provide lighting simulation design, pole (tall pole) design, customized solution quotation, and installation guidance.
Advantages of FL07 LED Motion & Highbay Lighting
- Multiple power options: 400W~3200W
- High luminous efficacy: up to 185lm/w
- Surge protection: 10/20KV SPD
- Good luminous flux maintenance: 100,000 hours at L70
- Full certification available: ENEC /CB /CE /RoHS
- After-sales guarantee: 5-year warranty
- Adjustable angle: 270° adjustable bracket
- Easy to replace: modular design
- Lens Versatility: Asymmetric and symmetric optics
- Low Glare and Light Pollution: No Spillage/No Glare
Applications of Hylele LED sports high mast light
Application of Hylele in football fields
A standard football field length is usually between 90 meters and 120 meters, and its width is between 45 meters and 90 meters. Taking an international football field as an example, its standard dimensions are 105 meters long and 68 meters wide. We usually recommend 4-8 light poles distributed around the stadium and 6-20 lamps installed on each light pole to illuminate the entire football field. The following is a project case diagram of 100 1800W FL07 installed on four 20-meter high poles. The project will be completed in early 2024, with an average illumination of>2000lux.
Application of Hylele on tennis courts
A standard tennis court is 23.77 meters (78 feet) long and 10.97 meters (36 feet) wide. For doubles matches, the court width increases slightly to 11.89 meters (39 feet). When FL07 is used to illuminate tennis courts, we can often recommend the 250-600W option. If multiple tennis courts are next to each other, we can also increase the wattage of the lamps or increase the number of lamps to meet the lighting needs.
Application of FL07 in the baseball diamond
The exact dimensions of a baseball diamond can vary, but typically, a baseball diamond is a fan-shaped field that includes an “infield” and an “outfield.” The “infield” is a rhombus, hence the name baseball diamond. “Outfield” refers to areas other than the infield. If you are interested in baseball field lighting,
Application of Hylele in cricket court
According to the regulations of the International Cricket Council (ICC), the size of the cricket field is divided into pitch size and track size. Court size: The minimum length is 90 meters and the maximum is no more than 150 meters; the minimum width is 60 meters and the maximum is 65 meters. Runway size: minimum length is 10 meters and maximum is 32 meters; width is minimum 3 meters and maximum is 3.05 meters. In the lighting industry, we divide the entire pitch into pitch, infield, and outfield. These three areas have greatly different lighting requirements due to their different uses in the game. Due to space limitations, we will not elaborate here. The following is the lighting simulationwe conducted for reference.
